Quick Looks

Manufacturer: RealSpace Models
Name: Gemini Titan
Scale: 1:72
Kit contents: 16 resin parts
2 styrene tubes
brass rod
styrene half round rod
Instruction sheet
Comments: The resin parts are superbly molded with no evident pinholes. The complicated first stage thrust structure is to be built up using resin parts and the supplied brass rod and a handy resin alignment jig. Brass rod is also to be cut to fit into the interstage structure. Resin parts provide caps for the styrene tubes which make up the major parts of the first and second stages. The interstage structure is open, with second stage engine detail visible. The Gemini capsule is one solid resin piece with nicely molded details. Half round rod is provided to represent the conduits that run along the sides of the booster. The instructions are broken into graphical steps, with details on removing the parts from the resin plugs. Painting details for each part are also included where needed. A full wraparound painting and painting guide is also included, with much of the roll patterns and other details being included as decals.

Note: Many of the parts have been upgraded with more detail. See the Upgrades page for more information.

Order from: RealSpace Models
813 Watt Dr.
Tallahassee, FL 32303

email: realspace@nettally.com
web: http://www.realspacemodels.com/
(as of 01/01/01)

Part views

Back to the Quick Looks index

Back to the Scale Models page

Sven Knudson