Lunar Module

Download an Adobe PDF file of full sized scans (300 dpi) for printing on your own printer. The most current version of the Adobe Acrobat software may be obtained free of charge from the Adobe web site:

Assembly drawings


Parts drawings


Recommended materials for construction

Part
number
Number
required
Recommended
material
Color
1OneWood - pineBlack
2OneWood - pineBlack
3FourWood - pineWhite
4 Assy.FourMetal brazing rodSilver
5OneWood pineWhite
6 Assy.FourWood pineBlack
7OneWood pineWhite
8OneWood - dowelingWhite
9 Assy.OneWood pineWhite
10 Assy.OneWood pineBlack
11OneWood pineWhite
12OneWood pineWhite
13OneWood pineWhite


Recommended procedure for construction

Part
no.
Suggested
materials
Fabrication
technique
Surface
treatment
Assembly
recommendations
1Wood - pineCut to length and turn to specified dimensions.Finish sand.
2Wood - pineCut to thickness. File to specified diameter.Finish sand.Glue part 1 to part 2 with epoxy resin. Paint assembly black.
3Wood - pineCut to thickness. File to specified diameter.Finish sand. Paint white.
4 Assy.Metal, 1/8" and 1/16" brazing rodCut rods to lengths. Form necessary rods and braze together. Use detail drawing for pattern.Clean. Paint black.
5Wood pine ("B")
Wood 1/8" diameter dowel ("A")
Cut to thickness. Shape to specified dimensions.Finish sand. Paint white.
6 Assy.Wood pineCut parts "A" and "B" to specified dimensions. Drill holes in "B"Finish sand.Glue part "A" to part "B" with epoxy resin. Paint assembly black.
7Wood pineCut to specified dimensions.Finish sand.
8Wood 3/4" diameter dowelCut to length.Finish sand.
9 Assy.Wood pineCut all parts to specified dimensions.Finish sand after assembly.Glue parts "A", "B", and "C" together using epoxy cement.
10 Assy.Wood pine ("D")
Wood 1/8" diameter dowel ("E")
Wood 1/16" diameter dowel ("F")
Cut parts "D", "E", and "F" to specified dimensions.Finish sand after assembly.Glue parts "D", "E", and "F" together using epoxy cement. Paint assembly black.
11Wood pineCut and radius to specified dimensions.Finish sand.
12Wood pineCut to specified thickness and diameter. Make cut-outs (windows) with wood chisel.Finish sand.Glue parts 8, 9, and 11 to part 12 using epoxy cement.
13Wood pineCut to thickness and shape per specified dimensions.Finish sand.Glue parts 5, 7, and 12 to part 13. Paint assembly white.
Drill 1/16" diameter holes in parts 7 and 12 and install part 6 assy. with epoxy cement.
Paint cutouts in part 12 black.
Glue part 10 assy to part 9 assy with epoxy cement.
Glue part 2 to bottom of part 5 with epoxy cement.
Glue part 3 to part 4 with epoxy cement.
**CAUTION Check levelness of model prior to gluing of landing pads to landing struts.
Drill 1/16" diameter holes in part 5 and glue part 4 to part 5 with epoxy cement.



Back to index

Back to scale models page