Quick Looks

Manufacturer: Anigrand Craftswork
Name: Curtiss Wright X-19
Scale: 1:72
Kit contents: 25 resin pieces
8 clear vacuformed pieces
Comments: The resin parts, with the exception of the fuselage halves, are solid. The fuselage is a shell cast so that you can add interior detail, since there is scant detail included with the kit other than a couple of ejection seats and the cockpit coaming. Panel lines are engraved into the parts which have a smooth surface finish and very few visible airholes. All parts are still attached to their pour plugs and there is some flash that will have to be cleaned up. You will probably want to replace the landing gear struts with something a little more substantial: the resin struts appear to be quite fragile. You will also have to supply a bit of sheet styrene (not much at all) to construct a splitter plate for the engine air intake. The instruction sheet consists of a short program history, a parts list with exploded assembly drawing, a photo of the real aircraft in flight, and a three view painting and decaling guide.
Order from: Anigrand Craftswork
P.O. Box 89571
Kowloon City, Kln
email: email@anigrand.com
web: http://www.anigrand.com/
(as of 2/9/03)
$36.00 + shipping

Part views

Back to the Quick Looks index

Back to the Scale Models page

Sven Knudson